ToolkitRC M6 V2.0 150W 10A Charger, Cell Checker, Servo Tester
100 in stock (can be backordered)
Login to view prices
The Toolkit RC M6 V2.0 is a small 150w color screen charger! At heart, the M6 is a small and compact charger that boasts a wide array of other features not found in chargers on the market. Additional functionality includes a servo tester, battery cell checker, wattmeter (power meter), PWM/PPM/S.Bus input testers (for receiver testing), as well as output generators that offer variable voltage and amperage with DC current.
Toolkit M6 Features
- Battery Charger
- Cell Checker
- Servo Tester
- PWM,PPM, S.Bus Input/output & Receiver tester
- Viable AMP/Volt DC Power supply (Requires external DC input)
Charger Features
- Lithium battery cut-off voltage can be set (TVC function)
- Measure battery voltage, internal resistance, balance
- Measure PWM,PPM, S.Bus signal values @ 1ms accuracy
- Output PWM, PPM, S.Bus standard signal @ 1ms accuracy
- The customizable 1-28V constant output voltage, 1-10A constant output current
- Multi-language optional
- USB 2.1A@5.0V Output (Mobile device charging)
- U-disk firmware upgrade (Slave device)
Charger
- Input voltage: 7.0-28V
- Type of battery: Lipo, LiHV, LiFe, Lion @ 1-6S, NiMh @ 1-16S, Pb @ 1-10S
- Charge power: 150W / Up to 10A
- Discharge power: Recycle Mode: 150W/ Up to 10A Normal Mode: 8W @ Up to 2A
- USB: 2.1A @ 5.0V (Mobile Charging) or USB Firmware updating
- Dimensions: 68x49x26mm
- Weight: 80g
- LCD: 1.8inch TFT RGB, 160×128 Pixel
Measurement
- PWM: 880-2200us @ 20-400Hz
- PPM: 880-2200us*8CH @ 20-50Hz
- SBUS: 880-2200us*16CH @ 20-100Hz
- Voltage: 1.0-5.0V @ 1-6S
- IR: 10-99mR @ 1-6S
Output
- PWM: 500-2500us @ 20-1000Hz
- PPM: 880-2200us*8CH @ 50Hz
- SBUS: 880-2200us*16CH @ 74Hz
- Power: 1-10A @ 1-28V Mode:CC+CV
Error Codes
1.over current
2.overvoltage
3.over temperature
4.timeout
5.battery is invalid
6.input low
7.input is too high
8.balance is complete
9.is not connected to the balance port
10.not connected to the main port
11.timeout
12.types do not match
13.cells error
14.battery needs to be balanced
15.This mode is not rechargeable
| Weight | 0.143 kg |
|---|---|
| Dimensions | 70 × 50 × 26 cm |
Toolkit M6 Features:
Battery Charger
Cell Checker
Servo Tester
PWM,PPM, S.Bus Input/output & Receiver tester
Viable AMP/Volt DC Power supply
Specification:
USB Output: 5V 2.1A
Weight: 80g
Feature:
1.The M6 charger come with LCD Display
2.Charge, discharge and balance management support Lipo, LiHV ,LiFe,Lion 1-6S, NiMh 1-16s ,Pb 1-12S battery
3.Can measure battery voltage, battery internal resistance, balance
4.Can measure PWM / PPM / SBUS / DBUS and other signal values accuracy 1s.
5.Can output PWM / PPM / SBUS standard signal, accuracy 1s.
6.Customizable 1-28V constant voltage,1-10A constant current.
7.Compatible with iOS and android mobile device.
8.Charge the drone battery,active and charge.
9.USB 2.1A@5.0V Output,for mobile phone devices.
10.Udisk firmware upgarde.(Slave device).
11.Multi-language support.
12.TFT 1.8″Full color LCD.
13.150w 10A Charging capacity.
14.0.1a to 10A Discharge/Storage mode with Energy recycle function (high amp discharge and storage when using a battery as the power source.
15.PWM Signal generating function for servo testing.
16.User controlled Power Supply mode with adjustable voltage and amperage output.
17.Cell balancing and IR testing mode.
18.Easy Firmware update, charger acts like USB drive then just copy and past firmware file.
Measurement:
PWM: 880-2200us @ 20-400Hz
PPM: 880-2200us*8CH @ 20-50Hz
SBUS: 880-2200us*16CH @ 20-100Hz
Voltage: 1.0-5.0V @ 1-6S
IR: 10-99mR @ 1-6S
Output:
PWM: 500-2500us @ 20-1000Hz
PPM: 880-2200us*8CH @ 50Hz
SBUS: 880-2200us*16CH @ 74Hz
Power: 1-10A @ 1-28V Mode:CC+CV
1X USB Cable
1X Manual
There are no reviews yet.