SoloGood F722 80A Stack Flight Control Suitable for 13 inch FPV Freestyle Drone

Description

• Support up to 8 motor outputs to easily build X8 drones.
• Integrated 5V/10V dual BEC ensures stable operation
• Four LED status indicators display the working status under different states.
• Although the flight control is small, it has all five internal components. The F722 main control chip, onboard OSD chip, barometer, and onboard black box chip.
• The use of large pads ensures that the pads are kept away from components to ensure perfect soldering for beginners.

SoloGood F722 Stack

Input voltage: 3-6S Lipo(11v-26v max)

Installing Hole: 30.5*30.5mm, M3

Support Protocols: DShot600/300

Weight: 23g

FC Specifications

Main control: STM32F722RET6

Gyroscope: ICM42688P

Barometer: Support (SPL-06)

OSD: Support (AT7456E)

BEC: 10V/2A, 5V/2A

UART port: 6

Black box: onboard (16M flash memory)

Number of supported motors: M1-M8

Firmware name: BETAFLIGHT: SOLOGOODF722

Input voltage: 3-6S lithium battery (11-30V MAX)

Output voltage: VBAT

Installation hole: 30.5×30.5mm (4mm aperture)

Flight control size: 38.5×38.5mm

Weight: 8.1 grams

LED status: blue: gyroscope status, green: 3V3 indication, red: 5Vbec indication, white: 10Vbec indication

DJI/Vista: Support/6pin

Electric regulation

TVS protective diode: Yes

External capacitor: 1000uF high-frequency low resistance capacitor (included in the packaging)

ESC/Motor Protocol: DSHOT300/600

Continuous current: 60A

Maximum current :65A

Installation hole: 30.5×30.5mm (4mm aperture)

For more info about FC, pls scan this app

Sologood 80A 4in1 ESC SPEC:

BLS 8-bit ESC-80A
Firmware:B_X_40_24_V0.21
Current scaling value:110
Input Voltage:3-8s
Continuous current:80A
Instantaneous current:90A
Size:58*58.4mm
Fixing hole:30.5*30.5 M4
Weight:28.4g