-4%
,

SKYSTARS F7HD Pro3 Flight controller and AM60A AM-32 32bit 4IN1 ESC fly tower stack


Login to view prices

FC Specifications:

MCU: STM32F722RGT6 216MHz
Gyroscope: BMI270
Baro:Bmp280
OSD: Betaflight SPI OSD DJI HD OSD(UART6)
Black box: 16MB
6x Uarts: UART 1/2/3/4/5/6
4x PWM outputs
1x I2C
3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
USB Type-C(USB2.0)
1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V)
VTX 10V/Vbat filtered power ON/OFF switch
DJI FPV OSD is supported by any spare UART
LED: 4 LED independent pads, support WS2812 programming lamp output.
Receiver: Support Sbus, crsf, ibus, SBUS, XBUS, support 3.3v Spektrum satellite receiver, The default receiver input is UART1(You can solder ELRS RX on UART1), F7 has a built-in inverter, which can actually be installed in any spare UART.

Power:

Input voltage: 3-6S
BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI
LDO 3.3V: Max.250mA

FC Firmware:

BetaFlight firmware: SKYSTARSF722Pro
INAV firmware:SKYSTARSF722HD

Mounting:

Installation size: 30.5mm ¡Á 30.5mm The installation hole is M4 and supports shock column installation
External size 39mm ¡Á 39mm
Flight control weight: 6.9g
Flight control onboard voltage sensor.

 

AM60A 4IN1 3-6S ESC AM-32 DShot1200 600 4-in-1 ESC:

Support Dshot1200, Dshot600, PWM control signal
Input voltage: 3-6S LiPo
Con.Current: 60A
Peak Current: 80A¡Ý 10S
Firmware: AM_32
Support : Dshot 600/1200
Mounting hole : 30.5mm/M3
BEC: No
Product size: 41*46*7.6mm
Weight: 18g

1. Excellent over-current capability.
By adopt the best PCB material and PCB production process. Such as application of high TG materials , 3oz copper PCB & 2¦Ìm gold deposition process on PCB. Together with 6-layer layout design of board,compared with others common 4 layer,It can withstand bigger current.

2. Extreme stably support 6S LiPo battery
By use of 24 pcs of new Toshiba standard 40V 5×6 Mosfet & imported from USA or Japan electronic materials. Plus advanced lead-free SMT Processing technology.It make ESC can fully support 6s battery and get a better performance.

3. Excellent heat dissipation performance
The CNC hollow aluminum alloy shell use, Not only good for heat dissipation, but also get a beautiful appearance.

4. Better control performance
Flashed with the latest AM_32 firmware in factory, support telemetry functions (including voltage ,RPMS & current )

Including

1x F7HD Pro3 FC
1x AM60 AM_32 4IN1 ESC
8x Silicon grommets M4 to M3
2x JST-SH1.0_8pin cable, 4cm
1x JST-GH-6P cable for DJI port, 10cm

SKU: BS043-051 Categories: ,
Weight 0.5 kg

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “SKYSTARS F7HD Pro3 Flight controller and AM60A AM-32 32bit 4IN1 ESC fly tower stack”

There are no reviews yet.