Matek Systems Hall effect Current Sensor 150A 23*20*23mm
Login to view prices
Specifications
Hall effect current sensor
No voltage drop and heat on current sensor components
Offset and Sensitivity are calibrated in factory
Continuous current rating: 0~150A DC
Sensitivity: 20mV/A, INAV/BF scale = 200, ArduPilot BATT_AMP_PERVLT = 50
VBAT voltage sense: 0~69V, INAV scale = 2100, BF scale = 210, ArduPilot BATT_VOLT_MULT = 21.0
Power Consumption: 17mA
Voltage offset error at zero current : +-10mV
Curr output voltage error: 5%
Operating Temperatures: -30~80 °C
23 * 20* 23mm, 7g
step file HCS-150A_step.zip
Soldering pads
Vbat: for voltage sense, support 0~69V IN
Volt: = 1/21 Vbat, 0~3.3V out
Curr: Current signal, 0~3.3V out
5V: power supply for HCS-150A board, support 4~13V IN, 17mA
G: GND
TX/RX: for firmware update and configure (to be supported)
Tips
mount Hall sensor far from iron and magnetic material
| Weight | 0.05 kg |
|---|
Based on 0 reviews
Be the first to review “Matek Systems Hall effect Current Sensor 150A 23*20*23mm”
Related products
-
Electronics, Flight Controllers
ZEEZ F7 2020 FLIGHT CONTROLLER V2 LITE
The Zeez F7 V2 2020 is an 8-Motor Output Flight Controller including an F7 processor designed with top-of-the-line hardware. This new V2 edition has improved stability and power supply cleaning. Pads are now easier to solder with added copper surrounding all pads to grant more strength. This FC is DJI HD System ready with a simple plug-and-play configuration. Get ready for the optimal flight experience with Zeez!
SKU: BS070-003 -
Electronics, FC/ESC Stacks
iFlight SucceX-E Mini F4 FC Stack + 35A 2-6S BLHeliS 4-in-1 ESC (MPU6000)
The SucceX-E Mini F4 Stack by iFlight includes the advanced SucceX Mini F4 Flight Controller along with the SucceX 35A 4-in-1 ESC, which can handle up to 6S input voltage and push your FPV racer to the max.
SKU: BS008--0051
There are no reviews yet.