JHEMCU GF30F405-ICM Baro OSD BalckBox 5V 10V Dual BEC F405 Flight Controller 3-8S 30X30mm for FPV Freestyle Drones DIY Parts
Login to view prices
Description
MCU: STM32F405RGT6
Power supply: 3-8S (11V-36V)
Signal Protocol: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300,Dshot600.
Sensor: ICM-42688-P
Size: 36*36mm (30.5mm mounting hole, 4MM diameter)
Firmware version: Betaflight JHEF405pro / INAV_6.1.0_JHEMCUF405
Black box: 16MB
Barometer: SPL06
OSD: Support
Support DJI VTX: with reserved interface
USB: TYPE-C interface
IIC: Support
UART: 4 ways, UART1, 3, 4, 6, where UART3 is the receiver
BEC: BEC 5V/3A and 10V/2A
Receiver: SBUS, IBUS, DS M2/X, TBS, CRSF, etc.
Support WS2812 programmable LED
Support buzzer
Built-in voltage sensor with current detection port
Weight: 8.7g
Packing list:
GF30F405-ICM *1
8P plug cable *1
M3 shock absorption ball *4
Based on 0 reviews
Be the first to review “JHEMCU GF30F405-ICM Baro OSD BalckBox 5V 10V Dual BEC F405 Flight Controller 3-8S 30X30mm for FPV Freestyle Drones DIY Parts”
Related products
-
Flight Controllers
JHEMCU 30X30mm GH743AIO MPU6000 H743 OSD Dual BEC Flight Controller BLHELIS 40A 4in1 ESC 3-6S
Flight ControllersJHEMCU 30X30mm GH743AIO MPU6000 H743 OSD Dual BEC Flight Controller BLHELIS 40A 4in1 ESC 3-6S
ESC output current 40A continuous current, 4 independent current outputs, USB port installed on the side, built-in USB ESD chip, all signal ports add protection buffer components, imported originals, stable quality, reserved common functional interface pads, UART port There are 7 ways. Half-hole motor pad, support high current output, adopt STM32H743 processor, OSD, BEC 5V/2.5A and 10V/2A, support 3-6S battery.
Flight control parameters· CPU: STM32H743
· Sensor: MPU6000
· OSD: AT7456E
· Barometer: BMP280
· IIC: Support
· Black box: 8MB
· BEC: 5V/2.5A, 10V/2.5A
· HDVTX: DJI VTX->UART6, reserved special socket, equipped with plug wire
· RC_IN:UART2
UART: UART1, UART2, UART3, UART4, UART6, UART7, UART8
· USB: micro usb
· Size: 30.5*30.5MM (Max: 42*43MM)
· Receiver: ELRS (CRSF), TBS (CRSF), SBUS, IBUS, DSM2, DSMX
· Support programmable LED such as WS2812
· Support buzzer
· Built-in voltage and current sensors
· Weight: 7.5 grams
·
ESC parameters
· BLHELI_S
· Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
· Input voltage: 3S-6S Lipo
· Continuous current: 40A
· Firmware: BLHELI_S G_H_30_REV16_7.HEX· Shipping packaging
· GH743AIO *1
· 14AWG wire red *1
· 14AWG wire black *1
· 5P->8P DJI plug cable *1
· M2*6.5MM red *4
· XT60 with black cap *1
· 1000UF/35A capacitor *1
SKU: BS032-052
There are no reviews yet.