This is currently on Pre order and expected to ship by July middle. Pre order the Mobula6 HDZero at the best price now!
Introducing Mobula 6 HD Zero, the very first 65mm HD brushless whoop in the World, weights less than 23.5 grams only! Happymodel have been working on innovations of Brushless Whoop for many years. And finally, they are out with a 65mm FPV whoop carrying HD VTX. Teaming with HDZero, Runcam, Nick Burns, Mr Shutterbug, Ryan Quellet and many other enthusiasts, here the dream comes true finally! Mobula6 HDZero weighs only 23.5g, offcourse that is without the weight of the battery. However, It is nearly the same weight as of an Analog 65mm Whoop that would be around 20g.
Happymodel Mobula 6 HD features the SuperbeeF4 lite flight controller with the built in Receiver for FrSky or ELRS. With the ExpressLRS, you don’t have to worry about the Radio range. Being video range is something that lacks for a 65mm Analog whoop, Now the HDZero takes it further which increased the fun to fly it further. It uses EX0802 19000kv motors which ensures optimum perfomance and more fun with the Whoop. Need to say, this is a long range 65mm whoop now :).
HDZero is set out to set new standards for FPV that provides an unparalleled, robust, and unidirectional secure video/audio/data wireless link. In collaboration with Runcam, they have released an onboard HDZero nano camera for the Mobula 6 which makes it Mobula 6 HDZero after taking feedbacks and doing Research and development for some time. In short, Mobula 6 HDZero is going to be the favorite whoop for whoop lovers and whoop masters shortly.
Specification of Mobula 6 HD Zero Whoop:
- Brand: Happymodel
- Model: Mobula6 HDZero
- Frame wheelbase: 65mm
- Weight: 23.5 gram without battery
- Size: 80mm*80mm*50mm
- Receiver option:
- SPI ELRS 2.4GHz
- SPI FRSKY 2.4GHz
- Compatible with 1S Lipo battery or Lihv battery PH2.0 Plug ( NOT Included)
Package includes:
| Item Name | Qty |
| Mobula 6 HD 65mm frame+Canopy | 1 |
| SPI Receiver Option1: SuperbeeF4 Lite FC built-in ExpressLRS SPI RX | 1 |
| SPI Receiver Option2: SuperbeeF4 Lite FC built-in Frsky SPI RX | |
| EX0802 KV19000 Unibell brushless motor | 4 |
| Gemfan 1210 31mm propeller(4cw+4ccw) | 1 |
| HDZero Nano Lite Camera | 1 |
| HDZero Whoop Lite VTX | 1 |
| Spare Canopy | 1 |
| Propeller disassemble tool | 1 |
| Screw driver | 1 |
| Flight controller
SuperbeeF4 Lite ELRS/FRSKY |
SPI ELRS version Firmware target: CrazybeeF4SX1280
SPI FRSKY version Firmware target: CrazybeeF4FR |
| Onboard 4in1 ESC | MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HV (2.8v~4.35v) Currents: 5A continuous peak 6A (5 seconds) Support BLHeliSuite programmable Factory firmware: O_H_5_REV16_8.HEX Default protocol: DSHOT150/DSHOT300/DSHOT600 |
| Onboard SPI ExpressLRS 2.4GHz Receiver | Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz RF Frequency: 2.4GHzAntenna plug: IPEX Telemetry output Power: <12dBmReceiver protocol: SPI ExpressLRSCould bind with ELRS V2.0 firmware TX module |
| Onboard Frsky SPI D8 /D16 2.4GHz Receiver | SPI BUS receiver Frsky D8/D16 compatible Compatible Non EU transmitter D8 model and EU-LBT(Frsky_x_lbt)Channels: 8ch or 16ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200mBased on CC2500 RF module Compatible with Futaba S-FHSS , Redpine protocol |
| Motor | Mode: EX0802 19000KV Configu-ration:9N12P Stator Diamter:8mm Stator Length:2mm Shaft Diameter:Φ1mm Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm Weight(g):1.7g No.of Cells(Lipo):1S only |
| Propeller Gemfan 1219 Bi-blades | Weight:0.19g Material: PC Pitch:1 inchProps Dia:30mm Center Hole Dia:1mm |
| HDZero Nano Lite Camera | 14x16x11 mm
1.5gram 0.5 inch, up to 10650 mV/Lux-sec ultra-high sensitive CMos sensor Excellent low light performance Fov: 4:3: D:130° H:108° v:84° 16:9:D:122° H:108° V:65° |
| HDZero Whoop Lite VTX | 1S Input
25mW/200mW RF Output-SmartAudio Support 25.5×25.5 M2 Soft Mounting- Antenna Retention Removable Shielding Box- 32.5×32.5mm(29x29mm inner) 4.5grams/4mm Thickness (without shielding) |
Check out the old Mobula 6 HD version here. It dont have Built in ELRS and its been added to the HDZero Mobula 6 Whoop. So now get yours at Beasthobby.
Based on 0 reviews
Be the first to review “Happymodel Mobula 6 HDZero 65mm HDZero Whoop”
Related products
-
Micro RTF/BNF, Ready-To-Fly Drones
EMAX TinyHawk II Micro Brushless FPV Drone (RTF Bundle)
The RTF Bundle gives you everything you need to start flying in just minutes. Everything is included, goggles, radio, and of course the TinyHawk II quadcopter! This bundle is the perfect solution for anyone to learn the basic of FPV flying, beginners and pros alike.
SKU: EX-0002 -
Micro RTF/BNF, Ready-To-Fly Drones
EMAX TinyHawk 2 Micro Brushless FPV Drone w/ RunCam Nano 2 (BNF)
EMAX has gone back to make what was already an amazing micro quadcopter even better, with a RunCam Nano 2 FPV Camera with adjustable tilt, higher power VTX, LEDs, and more powerful motors.
SKU: EX-0003 -
Micro RTF/BNF, Ready-To-Fly Drones
EMAX TinyHawk 2 Micro Brushless FPV Drone w/ RunCam Nano 2 (BNF)
EMAX has gone back to make what was already an amazing micro quadcopter even better, with a RunCam Nano 2 FPV Camera with adjustable tilt, higher power VTX, LEDs, and more powerful motors.
SKU: EX-0003
There are no reviews yet.