-4%
,

Holybro Tekko32 F4 Metal 65A 4-in-1 ESC


Login to view prices

About this product

The all-new Tekko32 Metal is the first 4-in1- ESC in the market to adapt to the fast F4 MCU, Powerful & reliable metal-cased MOSFET 4-in-1 ESC with smooth control and quick response.

Note: Airflow for the ESC is very important if you want to run this 4in1 in a high current.
The battery wire (from Lipo to 4in1 ESC) should be at least 12AWG and well soldered.

Features

  • New & faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
  • PWM output up to 96K (default 48K)
  • Metal-cased MOSFET for excellent heat dissipation
  • Massive on-board capacitance for noise filtering at 2068uf
  • 3 oz copper PCB design to allow bigger current and better heat dissipation
  • A separate drive & control circuit broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.

Specification

  • Continuous Current: 65A x4
  • Burst Current: 75A x4
  • Supports 4-6S battery
  • Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc.
  • ESC telemetry Supported
  • Onboard analog current sensor
  • No output BEC
  • BLHeli_32 firmware
  • 1000uf 35v capacitor included (highly recommended for 6s setup)
  • Amperage meter scale ratio: 168
  • Dimensions: 43 x 44mm / Weight: 15.8g
  • Mounting holes: M4 30.5×30.5mm (M3 grommets included)

PIN MAP

Holybro Tekko32 F4 Metal 65A 4-in-1 ESC

Includes

  • 1 x Tekko32 F4 Metal 4in1 65A ESC
  • 4 x M3 Anti-Vibration Silicone Grommet Insert
  • 1 x Electrolytic capacitor: 1000uF 35v
  • 1 x 8pin to 8pin 1mm pitch 65mm cable
  • 1 x 8pin to 8pin 1mm pitch 25mm cable

Downloads

Some Tips

SKU: BS030-013 Categories: ,
Weight 0.1 kg

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Holybro Tekko32 F4 Metal 65A 4-in-1 ESC”

There are no reviews yet.