-11%
,

MATEKSYS AP Periph CAN Node – CAN-L431


Login to view prices

About this product

The Mateksys CAN-L431 is an Adapter Node based on ArudPilot AP_Periph firmware. With this board, you can easily utilize the ArduPilot driver library to convert ArduPilot-supported GNSS, Compass, Barometer, Airspeed sensor, and GPIO-based (PWM, Buzzer/LED notify) peripherals to DroneCAN bus peripherals.

Features

  • ArduPilot AP_Periph MatekL431-Periph, or MatekL431-Airspeed Firmware
  • CAN transceiver data rates up to 5 Mbit/s in the CAN FD fast phase
  • 4.5-5.5V Voltage Range
  • LED Indicators
  • 3 UARTs
MATEKSYS AP Periph CAN Node

Specifications

  • Firmware: ArduPilot AP_Periph MatekL431-Periph, or MatekL431-Airspeed (Update via DroneCAN GUI Tool)
  • I2C: 1 (for peripheral Airspeed sensor) (for peripheral Barometer) (for peripheral Compass QMC5883L)
  • ADC: 4x (BATT_VOLT, PIN 5) (BATT_CURR, PIN 6)( BATT2_VOLT, PIN 15) (BATT2_CURR, PIN 16)
  • LED: (Blue, Fast blinking, Booting) (Blue, Slow blinking, working) (Red, 3.3V indicator)
  • UARTs: 3 (UART1, spare) (UART2, MSP default, DFU) (UART3, GPS default)
  • CAN transceiver data rates: up to 5 Mbit/s in the CAN FD fast phase
  • CAN, DroneCAN Protocol: 1 (2x GH-4P connectors in parallel)
  • JST-GH-6P(SM06B-GHS-TB) for UART3+I2C: 1
  • Input voltage range: 4.5~5.5V @5V pad/pin
  • JST-GH-4P(SM04B-GHS-TB) for CAN: 2
  • JST-GH-4P(SM04B-GHS-TB) for I2C: 1
  • Operating Temperatures: -20~80 °C
  • GPIO with TIM16 for the buzzer: 1
  • MCU: STM32L431xC, 256KB Flash
  • ST debug, SWCLK & SWDIO
  • SPI: for peripheral RM3100
  • Power consumption: 40mA
  • Board Size: 26x26x6mm
  • PWM outputs: 5
  • Weight: 3.7g

Includes

  • 1x MATEKSYS AP Periph CAN Node – CAN-L431
  • 1x JST-GH-4P to JST-GH-4P 20cm silicon wire
  • 1x JST-GH-6P to JST-GH-6P 20cm silicon wire
SKU: BS040-112 Categories: ,
Weight 0.05 kg

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “MATEKSYS AP Periph CAN Node – CAN-L431”

There are no reviews yet.