The ZEEZ F7 V3 3030 is an 8 Motor Output, DJI HD System Ready Flight Controller with an on-board 9V@3A regulator to power the DJI Air Unit, with a simple plug and play configuration and 5V@3A regulator to power all the peripheral.
It uses a powerful F7 processor along with top-of-the-line hardware:ICM42688P Gyro, BMP388 Barometer, with a separate power rail for cleanest data. The ZEEZ F7 V3 3030 comes in a standard 30×30 form factor. It comes with spaces and pads for TBS Crossfire and TBS Unify Nano32 for a very clean and low-profile assembly. We have added a connector for a 2nd ESC to make building X8’s as easy as possible. There are 5 UARTS available as well as, I2C port, SD CARD for Blackbox data record, an OSD chip for analog video.
![](https://i0.wp.com/zeezrc.com/wp-content/uploads/2022/07/F7_V2_Black@4x.png?fit=211%2C300&ssl=1)
30 x 30
MOUNTING HOLES
3S-6S
BATTERY INPUT
5V-9V
BEC 3A CONTINUOUS
STM32F722
MICRO CONTROLLER
ICM42688P
GYRO/ACC
BMP388
BAROMETER
HD PLUG
DJI AND CADDX VISTA COMPATIBLE
X8
8 MOTOR COMPATIBLE
2nd ESC PLUG
FOR AN EASY X8 BUILD
5 UARTS
AVAILABLE
SD CARD
Maximum 8GB (SD and SD HC supported)
TBS
PADS FOR NANO RX & UNIFY PRO 32
![](https://i0.wp.com/zeezrc.com/wp-content/uploads/2022/07/Asset-2@4x.png?fit=957%2C1000&ssl=1)
![](https://zeezrc.com/wp-content/uploads/2022/07/F7_Bottom@4x-1.png)
There are no reviews yet.