Tekko32 F4 4in1 mini 45A ESC

SPEC:

• F4 MCU with BLHELI32 firmware
• Maximum PWM output upto 96K (default 48K)
• Amperage meter scale ratio has been adjusted to 168.
• PWM input, TLM supported
• Voltage output (VBAT)
• NO output BEC
• Supports oneshot / Multishot / Dshot PWM
• Supports damped light
• Supports 3-6S lipo input
• Ext. cap needed for 6s (1000uf 35v for 6s usage.)
• Mounting holes: 20x20mm(M3)
• Size:30 x 39 mm
• Weight: 7.2g

PIN MAP:

Atlatl HV micro

Features

• Compatible with all major FPV receivers from vendors such as Fatshark, ImmersionRC, etc.
• Supports the standard 40-channel set: band A, B, E, Fatshark, and Raceband.
• SmartAudio input allows remote control by the flight controller. Change channel, transmit power, and more from Betaflight OSD, flight controller USB port, Taranis Lua Script, and more.
• All parameters are controllable via push-button on the side of the unit, for cases where SmartAudio is not used.
• MMCX connector is durable and easy to use. Rated for 100’s of mating cycles. Easy and quick antenna changes. No more ripped-off UFL connectors.
• LED indicators for channel, band, and power. Allows easy check of vTX parameters simply by glancing at the quad.
• Variable transmit power from 25 mW to 800 mW. Use 25 mW for a race and then easily switch to 800 mW for freestyle.
• 0.5 mW True Pit Mode allows you to power up safely without the risk of knocking other pilots out of the air.
• Built in microphone, so you can listen to your motors while you fly, no matter how far away you fly.
• Standard 26mm form factor allows you to mount the Atlatl directly on your flight controller stack.

Specifications

• Output Power: 0.5 mW (pit mode), 25 mW, 200 mW, 500 mW, 800 mW
• Audio: 6.5 MHz Mono
• Protocol：smart audio2.0
• Antenna Connector: MMCX
• Input Voltage: 7 to 28 volts (2-6S LiPo)
• Dimensions: 30x26mm
• Mounting Holes: Standard 20mm square to center of holes (M3)
• Weight: 3.6g

Package Includes:

SKU20160 Kakute H7 Mini+Tekko32 F4 4in1 mini 45A ESC Stack
1x Kakute H7 Mini STACK
1x Electrolytic capacito: 1000uF 35v *1
1x JST SH 8pin to 8pin 65mm cable *1
1x JST SH 8pin to 8pin 25mm cable *1
1x JST SH 6pin 150mm cable*1 (The cable that goes to the CADDX Vista Air Unit is included.)
1x JST SH 6pin to GH 8pin 150mm cable*1 (The cable that goes to the DJI Air Unit is included.)
1x JST SH 6pin to GH 8pin 80mm cable*1 (The cable that goes to the DJI Air Unit is included.)

SKU20161 Kakute H7 Mini+Tekko32 F4 4in1 mini 45A ESC +Atlatl HV Micro Stack 
1x Kakute H7 Mini STACK
1x Electrolytic capacito: 1000uF 35v *1
1x JST SH 8pin to 8pin 65mm cable *1
1x JST SH 8pin to 8pin 25mm cable *1
1x JST SH 6pin 150mm cable*1 ( The cable that goes to the CADDX Vista Air Unit is included.)
1x JST SH 6pin to GH 8pin 150mm cable*1 ( The cable that goes to the DJI Air Unit is included.)
1x JST SH 6pin to GH 8pin 80mm cable*1  ( The cable that goes to the DJI Air Unit is included.)
1x 80mm SMA–MMCX Cable
1x 60mm Antenna
1x 150mm 4pin JST GH wire

Manual: