-5%
,

iFlight TITAN XL5 Analog 5inch 4S 6S FPV Drone BNF with SucceX-E F4 45A Stack/XING 2208 motor/ 5140 propeller for FPV Drone

Availability:

In Stock


$366.99$395.99

Clear

BNF Parts list (Build)

  • 1x  TITAN XL5 4S 6S FPV Drone – BNF
  • 2 sets Nazgul 5140 propellers
  • 1x GPS Module

Additional Suggested Parts (optional)

  • Battery 4S 1550mAh,6S 1300mAh
  • Adjustable GoPro mount (0-60°)

Description:

  • After our popular TITAN DC5 (DeadCat style frame) approach we decided to take a step back to the roots and create a new X-Geometry frame to get the best performance on both axis and better weight distribution for freestyle.

HIGHLIGHTS:

  • 6mm arm design for more durability
  • XING 2208 motors for more power
  • GPS pre-installed for more safety at distance
  • Variable GoPro TPU mount (supports ND-Filter inserts)
  • 360° TPU protection and Antenna mounts

PRE-TUNED & PRE-SETUP:

  • Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was appplied for a great flight experience!
  • GPS-rescure mode is configured and just needs to be enabled in your Betaflight Configurator! (Please be aware of how it works before you use it!)
  • Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!
  • Motor Power is configured to 70% throttle limit (scaled) by default to give more throttle stick resolution for an easy start on the 6S 1800kv version. Need more Power? Just enable 100% in the Betaflight Configurator to unleash the Beast!

FRAME // TITAN XL5:

  • Weight :145g
  • Wheelbase: 250mm
  • Main body dimension: 185*133mm
  • Bottom to top distance: 30mm
  • Arm thickness: 6mm
  • Bottom plate thickness: 2mm
  • Top plate thickness: 2mm
  • Camera plate thickness: 2mm (2.5mm included TPU inserts)

ELECTRONICS // SucceX-E F4 Stack (45A 4-in-1 ESC):

SucceX-E F4

  • MCU:STM32F405
  • IMU:MPU6000
  • Betaflight OSD:YES
  • Blackbox:8MB
  • 4X Uarts(1 2 3 6 )
  • 8 x Dshot/Proshot/Oneshot output
  • 8 x individual ESC power/ signal pads
  • 1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX
  • VTX protocol:YES(IRC Tramp)
  • WS2812 led Strip:YES
  • Baro:No
  • Beeper:YES
  • Input:2-6S(Max 8S)
  • BEC:5V/2.5A cont
  • Firmware :betaflight_4.0.5_BETAFLIGHTF4.hex

SucceX-E 45A 4in1


SKU: N/A Categories: ,
Weight N/A
Receiver Protocol

ELRS, ELRS 915MHz, Frsky XM, PNP – NO Receiver, R-XSR, TBS Crossfire

Battery Version

4S, 6S

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “iFlight TITAN XL5 Analog 5inch 4S 6S FPV Drone BNF with SucceX-E F4 45A Stack/XING 2208 motor/ 5140 propeller for FPV Drone”

There are no reviews yet.