BeastHobby RX_3301 Video Receiver Module with CVBS and DC Power Input 5-36V RSSI Signal for FPV Goggles

RX 3301 is a CVBS video input module designed to work with FPV goggles, featuring a receiving frequency of 3.3 GHz. It can also be used independently as a receiver, and is equipped with a 2.5 mm diameter headphone jack for video output. Additionally, it comes with a 1.0 mm & 5-pin flat cable interface, supporting a DC power input ranging from 5 V to 36 V, along with video output and RSSI signal strength level output (as well as a PWM counting pulse interface for channel adjustment).

Module Image and Functional Schematic Diagram

(1):Band Selection Button

A short press cycles through the current frequency bands FR1 to FR8, with a green indicator light showing the status. The number of flashes corresponds to the current frequency band

Press and hold the band selection button for 2 seconds to enter the auto-search mode. The blue indicator light flashes to indicate that the device is currently searching for the channel with image signal automatically, and the image of the channel with the strongest signal will be displayed after the search is completed.

(2):Channel Button

A short press cycles through the current channels CH1 to CH8, with a red indicator light showing the status. The number of flashes corresponds to the current channel.

(3):Green LED indicator; the number of flashes indicates the current frequency band.

(4):Blue LED indicator; flashing indicates that the device is currently in the process of auto-searching for channels.

(5):Red LED indicator; the number of flashes indicates the current channel.

(6):ANT—Antenna

(7):FPV Video Goggles Pin Header 2.54MM

(8):CVBS Headphone Jack

(9):1.0mm Flat Cable Socket

1. GND 2.DC 5-36V3.PWM  4.VDEO 5.RSSI

General

1(MechanicalSpecification):

PleaserefertoFigure2.

2 (EnvironmentalSpecification):

  (Temperature):-10℃~+65℃

3 (TestCondition):

• (Ambienttemperature):25℃

• (Videoinputvoltage):1.0Vp-p,150(IRE)

RX_25DF:(Dimension):

Channel Column