The Camera and Camera Mount for Gopro are NOT Included.
ONLY Include fixing mount Base.
- The 3-inch propeller has higher efficiency and strength; this product is easy to disassemble and easy to carry; reasonable power configuration, longer battery life.
- Excellent structural design brings a more enjoyable control feel to flight.
- Can drive full-size GOPRO, battery life up to about 6 minutes.
- The tail of the drone is equipped with LED lights with adjustable colors. There is a buzzer to control the alarm.
- There is a type-c interface, which can be used to adjust the flight control parameters.
Model: Cloud-149 V2
Bottom Plate Thickness: 3mm
Upper Plate Thickness: 2mm
|Flight Controller||Connector: Micro-USB
BEC Output: 5V 2A
INA Pad: nR2
Mounting pattern: 25.5×25.5mm/φ3mm
|BLHELI_ S 20A ESC||Con. Current: 20A
Burst Current: 25A
ESC Telemetry: No
ESC Firmware: G-H-30 BLS
|CLOUD-1408 3000KV Motor||Configuration: 9N12P
Stator Diamter: 14mm
Stator Length: 8mm
Shaft Diameter: 2mm
Motor Dimensions: Φ18.2 * 17.9mm
The hole position of motor: 12mm
|ERRF 5.8g 400mW VTX
Antenna interface: IPEX (UFL)
VTX protocol :TBS SmartAudio
|FOXEER Razer nano camera||Image Sensor: 1/3″ CMOS Sensor
Horizontal Resolution: 1200 TVL
Power Requirement: DC 4.5V~7V
|Propeller||Gemfan D76 76mm 3 Inch 5-Blade|
Recommended(No Included, need buy additionaly):
Flight Time: 6-9mins
1x REPTILE CLOUD149 V2 Frame kit
1x F411 AIO
1x 5.8G VTX
1x 5.8G Antenna
1x 1200TVL camera
4x 1408 3000KV motor
1x 5-blade three-inch propeller
1x Cable tie
1x Battery non-slip
2x EVA anti-collision strip
1x Hexagonal screwdriver
1x Corner pad
1x M2 screw
1x Fixing Mounting Base